Chassis painted , floor in, rear axle - ENGINE!!!!
Once engine was in seat back fitted and trial of Rocaro seat.
Of course you have to try it for size
Note the old size for the filler cap
and the straight down Rollover supports.
Now things begin to fill up !.... Scary stuff
Its a tight fit between the block and
the flimsy bulkhead.............. The Efi chamber
sticks through the bonnet- so a mould ( wifes roasting tray )
all the services,brakes, fuel etc from the tunnel come up here........was made and bulgeconstructed from GRP - note the Cone to bonnet initial fit !
Finally out on the drive..
Filling in some of the holes !!
the paint goes on
It all fits !!
And finally she was ready